OmniCubed Pro-Anchor (T31 Machine)
starting at $828
The Pro-Anchor T-31 Anchor Machine is used to easily and precisely cut curved T-slots in the back side of stone pieces for the attachment of anchor bolts used in bottom-mount sink or architectural facing systems. The machine features a split-clamp design for optimum grinder stability (unlike weak set-screw holders on other anchor machines). The machine is available with or without a vacuum-powered base. Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near cut outs or edges (i.e. the entire vacuum base does not have to be in contact with the surface). The vacuum base seal is cut as one piece of neoprene foam; this “seamless” design provides a superior leak-free seal with the stone to guarantee minimal air consumption. The machine also features industrial quick-couplers for both air and water, and the efficiently designed venturi vacuum generator creates high vacuum pressure with very low air consumption (only 0.5 SCFM). The machine cuts in both push and pull direction, and the water hose with ball valve and quick-coupler can be easily detached to spray the work area. The grinder accepts any T-31 anchor bit with ¼” shank. One-year manufacturer’s limited warranty (grinders are covered under their respective manufacturer’s warranties).
- Electric Model: A powerful and reliable electric Makita grinder with GFCI outlet adapter and a carrying/storage case are included
- Pneumatic Model: The pneumatic grinder only requires 3 SCFM, and the extended shaft is supported by five bearings for long life and also provides the ideal leverage to reduce strain while cutting